4 The Command Line

However, Grails takes it further through the use of convention and the grails command. When you type:

grails [command name]

Grails searches in the following directories for Gant scripts to execute:

• USER_HOME/.grails/scripts
• PROJECT_HOME/scripts
• PROJECT_HOME/plugins/*/scripts
• GRAILS_HOME/scripts

Grails will also convert command names that are in lower case form such as run-app into camel case. So typing

grails run-app

Results in a search for the following files:

• USER_HOME/.grails/scripts/RunApp.groovy
• PROJECT_HOME/scripts/RunApp.groovy
• PLUGINS_HOME/*/scripts/RunApp.groovy
• GLOBAL_PLUGINS_HOME/*/scripts/RunApp.groovy
• GRAILS_HOME/scripts/RunApp.groovy

If multiple matches are found Grails will give you a choice of which one to execute.

When Grails executes a Gant script, it invokes the "default" target defined in that script. If there is no default, Grails will quit with an error.

To get a list of all commands and some help about the available commands type:

grails help

which outputs usage instructions and the list of commands Grails is aware of:

Usage (optionals marked with *):
grails [environment]* [target] [arguments]*
Examples:
grails dev run-app
grails create-app books
Available Targets (type grails help 'target-name' for more info):
grails bootstrap
grails bug-report
grails clean
grails compile
...

Refer to the Command Line reference in the Quick Reference menu of the reference guide for more information about individual commands

It's often useful to provide custom arguments to the JVM when running Grails commands, in particular with run-app where you may for example want to set a higher maximum heap size. The Grails command will use any JVM options provided in the general JAVA_OPTS environment variable, but you can also specify a Grails-specific environment variable too:

export GRAILS_OPTS="-Xmx1G -Xms256m -XX:MaxPermSize=256m"
grails run-app

non-interactive mode

When you run a script manually and it prompts you for information, you can answer the questions and continue running the script. But when you run a script as part of an automated process, for example a continuous integration build server, there's no way to "answer" the questions. So you can pass the --non-interactive switch to the script command to tell Grails to accept the default answer for any questions, for example whether to install a missing plugin.

For example:

grails war --non-interactive

4.1 Interactive Mode

If you need to open a file whilst within interactive mode you can use the open command which will TAB complete file paths:

Even better, the open command understands the logical aliases 'test-report' and 'dep-report', which will open the most recent test and dependency reports respectively. In other words, to open the test report in a browser simply execute open test-report. You can even open multiple files at once: open test-report test/unit/MyTests.groovy will open the HTML test report in your browser and the MyTests.groovy source file in your text editor.

TAB completion also works for class names after the create-* commands:

If you need to run an external process whilst interactive mode is running you can do so by starting the command with a !:

Note that with ! (bang) commands, you get file path auto completion - ideal for external commands that operate on the file system such as 'ls', 'cat', 'git', etc.

4.2 Creating Gant Scripts

grails create-script compile-sources

Will create a script called scripts/CompileSources.groovy. A Gant script itself is similar to a regular Groovy script except that it supports the concept of "targets" and dependencies between them:

target(default:"The default target is the one that gets executed by Grails") {
    depends(clean, compile)
}
target(clean:"Clean out things") {
    ant.delete(dir:"output")
}
target(compile:"Compile some sources") {
    ant.mkdir(dir:"mkdir")
    ant.javac(srcdir:"src/java", destdir:"output")
}

As demonstrated in the script above, there is an implicit ant variable (an instance of groovy.util.AntBuilder) that allows access to the Apache Ant API.

In previous versions of Grails (1.0.3 and below), the variable was Ant, i.e. with a capital first letter.

You can also "depend" on other targets using the depends method demonstrated in the default target above.

The default target

In the example above, we specified a target with the explicit name "default". This is one way of defining the default target for a script. An alternative approach is to use the setDefaultTarget() method:

target("clean-compile": "Performs a clean compilation on the app source") {
    depends(clean, compile)
}
target(clean:"Clean out things") {
    ant.delete(dir:"output")
}
target(compile:"Compile some sources") {
    ant.mkdir(dir:"mkdir")
    ant.javac(srcdir:"src/java", destdir:"output")
}
setDefaultTarget("clean-compile")

This lets you call the default target directly from other scripts if you wish. Also, although we have put the call to setDefaultTarget() at the end of the script in this example, it can go anywhere as long as it comes after the target it refers to ("clean-compile" in this case).

Which approach is better? To be honest, you can use whichever you prefer - there don't seem to be any major advantages in either case. One thing we would say is that if you want to allow other scripts to call your "default" target, you should move it into a shared script that doesn't have a default target at all. We'll talk some more about this in the next section.

4.3 Re-using Grails scripts

The bootstrap script for example lets you bootstrap a Spring ApplicationContext instance to get access to the data source and so on (the integration tests use this):

includeTargets << grailsScript("_GrailsBootstrap")
target ('default': "Database stuff") {
    depends(configureProxy, packageApp, classpath, loadApp, configureApp)
    Connection c
    try {
        c = appCtx.getBean('dataSource').getConnection()
        // do something with connection
    }
    finally {
        c?.close()
    }
}

Pulling in targets from other scripts

Gant lets you pull in all targets (except "default") from another Gant script. You can then depend upon or invoke those targets as if they had been defined in the current script. The mechanism for doing this is the includeTargets property. Simply "append" a file or class to it using the left-shift operator:

includeTargets << new File("/path/to/my/script.groovy")
includeTargets << gant.tools.Ivy

Core Grails targets

As you saw in the example at the beginning of this section, you use neither the File- nor the class-based syntax for includeTargets when including core Grails targets. Instead, you should use the special grailsScript() method that is provided by the Grails command launcher (note that this is not available in normal Gant scripts, just Grails ones).

The syntax for the grailsScript() method is pretty straightforward: simply pass it the name of the Grails script to include, without any path information. Here is a list of Grails scripts that you could reuse:

There are many more scripts provided by Grails, so it is worth digging into the scripts themselves to find out what kind of targets are available. Anything that starts with an "_" is designed for reuse.

Script architecture

You maybe wondering what those underscores are doing in the names of the Grails scripts. That is Grails' way of determining that a script is internal , or in other words that it has not corresponding "command". So you can't run "grails _grails-settings" for example. That is also why they don't have a default target.

Internal scripts are all about code sharing and reuse. In fact, we recommend you take a similar approach in your own scripts: put all your targets into an internal script that can be easily shared, and provide simple command scripts that parse any command line arguments and delegate to the targets in the internal script. For example if you have a script that runs some functional tests, you can split it like this:

./scripts/FunctionalTests.groovy:
includeTargets << new File("${basedir}/scripts/_FunctionalTests.groovy")
target(default: "Runs the functional tests for this project.") {
    depends(runFunctionalTests)
}
./scripts/_FunctionalTests.groovy:
includeTargets << grailsScript("_GrailsTest")
target(runFunctionalTests: "Run functional tests.") {
    depends(...)
    …
}

Here are a few general guidelines on writing scripts:

• Split scripts into a "command" script and an internal one.
• Put the bulk of the implementation in the internal script.
• Put argument parsing into the "command" script.
• To pass arguments to a target, create some script variables and initialise them before calling the target.
• Avoid name clashes by using closures assigned to script variables instead of targets. You can then pass arguments direct to the closures.

4.4 Hooking into Events

The mechanism is deliberately simple and loosely specified. The list of possible events is not fixed in any way, so it is possible to hook into events triggered by plugin scripts, for which there is no equivalent event in the core target scripts.

Defining event handlers

Event handlers are defined in scripts called _Events.groovy. Grails searches for these scripts in the following locations:

• USER_HOME/.grails/scripts - user-specific event handlers
• PROJECT_HOME/scripts - applicaton-specific event handlers
• PLUGINS_HOME/*/scripts - plugin-specific event handlers
• GLOBAL_PLUGINS_HOME/*/scripts - event handlers provided by global plugins

Whenever an event is fired, all the registered handlers for that event are executed. Note that the registration of handlers is performed automatically by Grails, so you just need to declare them in the relevant _Events.groovy file.

Event handlers are blocks defined in _Events.groovy, with a name beginning with "event". The following example can be put in your /scripts directory to demonstrate the feature:

eventCreatedArtefact = { type, name ->
   println "Created $type $name"
}
eventStatusUpdate = { msg ->
   println msg
}
eventStatusFinal = { msg ->
   println msg
}

You can see here the three handlers eventCreatedArtefact, eventStatusUpdate, eventStatusFinal. Grails provides some standard events, which are documented in the command line reference guide. For example the compile command fires the following events:

• CompileStart - Called when compilation starts, passing the kind of compile - source or tests
• CompileEnd - Called when compilation is finished, passing the kind of compile - source or tests

Triggering events

To trigger an event simply include the Init.groovy script and call the event() closure:

includeTargets << grailsScript("_GrailsEvents")
event("StatusFinal", ["Super duper plugin action complete!"])

Common Events

Below is a table of some of the common events that can be leveraged:

4.5 Customising the build

The defaults

The core of the Grails build configuration is the grails.util.BuildSettings class, which contains quite a bit of useful information. It controls where classes are compiled to, what dependencies the application has, and other such settings.

Here is a selection of the configuration options and their default values:

The BuildSettings class has some other properties too, but they should be treated as read-only:

Of course, these properties aren't much good if you can't get hold of them. Fortunately that's easy to do: an instance of BuildSettings is available to your scripts as the grailsSettings script variable. You can also access it from your code by using the grails.util.BuildSettingsHolder class, but this isn't recommended.

Overriding the defaults

All of the properties in the first table can be overridden by a system property or a configuration option - simply use the "config option" name. For example, to change the project working directory, you could either run this command:

grails -Dgrails.project.work.dir=work compile

grails.project.work.dir = "work"

What happens if you use both a system property and a configuration option? Then the system property wins because it takes precedence over the BuildConfig.groovy file, which in turn takes precedence over the default values.

The BuildConfig.groovy file is a sibling of grails-app/conf/Config.groovy - the former contains options that only affect the build, whereas the latter contains those that affect the application at runtime. It's not limited to the options in the first table either: you will find build configuration options dotted around the documentation, such as ones for specifying the port that the embedded servlet container runs on or for determining what files get packaged in the WAR file.

Available build settings

4.6 Ant and Maven

Ant Integration

When you create a Grails application with the create-app command, Grails doesn't automatically create an Ant build.xml file but you can generate one with the integrate-with command:

grails integrate-with --ant

This creates a build.xml file containing the following targets:

• clean - Cleans the Grails application
• compile - Compiles your application's source code
• test - Runs the unit tests
• run - Equivalent to "grails run-app"
• war - Creates a WAR file
• deploy - Empty by default, but can be used to implement automatic deployment

Each of these can be run by Ant, for example:

ant war

The build file is configured to use Apache Ivy for dependency management, which means that it will automatically download all the requisite Grails JAR files and other dependencies on demand. You don't even have to install Grails locally to use it! That makes it particularly useful for continuous integration systems such as CruiseControl or Jenkins.

It uses the Grails Ant task to hook into the existing Grails build system. The task lets you run any Grails script that's available, not just the ones used by the generated build file. To use the task, you must first declare it:

<taskdef name="grailsTask"
         classname="grails.ant.GrailsTask"
         classpathref="grails.classpath"/>

This raises the question: what should be in "grails.classpath"? The task itself is in the "grails-bootstrap" JAR artifact, so that needs to be on the classpath at least. You should also include the "groovy-all" JAR. With the task defined, you just need to use it! The following table shows you what attributes are available:

The task also supports the following nested elements, all of which are standard Ant path structures:

• classpath - The build classpath (used to load Gant and the Grails scripts).
• compileClasspath - Classpath used to compile the application's classes.
• runtimeClasspath - Classpath used to run the application and package the WAR. Typically includes everything in @compileClasspath.
• testClasspath - Classpath used to compile and run the tests. Typically includes everything in runtimeClasspath.

How you populate these paths is up to you. If you use the home attribute and put your own dependencies in the lib directory, then you don't even need to use any of them. For an example of their use, take a look at the generated Ant build file for new apps.

Maven Integration

Grails provides integration with Maven 2 with a Maven plugin. The current Maven plugin is based on but supersedes the version created by Octo, who did a great job with the original.

Preparation

In order to use the new plugin, all you need is Maven 2 installed and set up. This is because you no longer need to install Grails separately to use it with Maven!

The Maven 2 integration for Grails has been designed and tested for Maven 2.0.9 and above. It will not work with earlier versions.

The default mvn setup DOES NOT supply sufficient memory to run the Grails environment. We recommend that you add the following environment variable setting to prevent poor performance:

export MAVEN_OPTS="-Xmx512m -XX:MaxPermSize=256"

Creating a Grails Maven Project

To create a Mavenized Grails project simply run the following command:

mvn archetype:generate -DarchetypeGroupId=org.grails \
    -DarchetypeArtifactId=grails-maven-archetype \
    -DarchetypeVersion=1.3.2 \
    -DgroupId=example -DartifactId=my-app

Choose whichever grails version, group ID and artifact ID you want for your application, but everything else must be as written. This will create a new Maven project with a POM and a couple of other files. What you won't see is anything that looks like a Grails application. So, the next step is to create the project structure that you're used to. But first, to set target JDK to Java 6, do that now. Open my-app/pom.xml and change

<plugin>
  <artifactId>maven-compiler-plugin</artifactId>
  <configuration>
    <source>1.5</source>
    <target>1.5</target>
  </configuration>
</plugin>

<plugin>
  <artifactId>maven-compiler-plugin</artifactId>
  <configuration>
    <source>1.6</source>
    <target>1.6</target>
  </configuration>
</plugin>

Then you're ready to create the project structure:

cd my-app
mvn initialize

if you see a message similar to this:

Resolving plugin JAR dependencies …
:: problems summary ::
:::: WARNINGS
        module not found: org.hibernate#hibernate-core;3.3.1.GA

you need to add the plugins manually to application.properties:

plugins.hibernate=2.0.0
plugins.tomcat=2.0.0

then run

mvn compile

and the hibernate and tomcat plugins will be installed.

Now you have a Grails application all ready to go. The plugin integrates into the standard build cycle, so you can use the standard Maven phases to build and package your app: mvn clean , mvn compile , mvn test , mvn package , mvn install .

You can also use some of the Grails commands that have been wrapped as Maven goals:

• grails:create-controller - Calls the create-controller command
• grails:create-domain-class - Calls the create-domain-class command
• grails:create-integration-test - Calls the create-integration-test command
• grails:create-pom - Creates a new Maven POM for an existing Grails project
• grails:create-script - Calls the create-script command
• grails:create-service - Calls the create-service command
• grails:create-taglib - Calls the create-tag-lib command
• grails:create-unit-test - Calls the create-unit-test command
• grails:exec - Executes an arbitrary Grails command line script
• grails:generate-all - Calls the generate-all command
• grails:generate-controller - Calls the generate-controller command
• grails:generate-views - Calls the generate-views command
• grails:install-plugin - Calls the install-plugin command
• grails:install-templates - Calls the install-templates command
• grails:list-plugins - Calls the list-plugins command
• grails:package - Calls the package command
• grails:run-app - Calls the run-app command
• grails:uninstall-plugin - Calls the uninstall-plugin command

For a complete, up to date list, run mvn grails:help

Mavenizing an existing project

Creating a new project is great way to start, but what if you already have one? You don't want to create a new project and then copy the contents of the old one over. The solution is to create a POM for the existing project using this Maven command (substitute the version number with the grails version of your existing project):

mvn org.grails:grails-maven-plugin:1.3.2:create-pom -DgroupId=com.mycompany

You may also want to set target JDK to Java 6; see above.

Adding Grails commands to phases

The standard POM created for you by Grails already attaches the appropriate core Grails commands to their corresponding build phases, so "compile" goes in the "compile" phase and "war" goes in the "package" phase. That doesn't help though when you want to attach a plugin's command to a particular phase. The classic example is functional tests. How do you make sure that your functional tests (using which ever plugin you have decided on) are run during the "integration-test" phase?

Fear not: all things are possible. In this case, you can associate the command to a phase using an extra "execution" block:

<plugin>
    <groupId>org.grails</groupId>
    <artifactId>grails-maven-plugin</artifactId>
    <version>1.3.2</version>
    <extensions>true</extensions>
    <executions>
        <execution>
            <goals>
            …
            </goals>
        </execution>
        <!-- Add the "functional-tests" command to the "integration-test" phase -->
        <execution>
            <id>functional-tests</id>
            <phase>integration-test</phase>
            <goals>
                <goal>exec</goal>
            </goals>
            <configuration>
                <command>functional-tests</command>
            </configuration>
        </execution>
    </executions>
</plugin>

This also demonstrates the grails:exec goal, which can be used to run any Grails command. Simply pass the name of the command as the command system property, and optionally specify the arguments with the args property:

mvn grails:exec -Dcommand=create-webtest -Dargs=Book

Debugging a Grails Maven Project

Maven can be launched in debug mode using the "mvnDebug" command. To launch your Grails application in debug, simply run:

mvnDebug grails:run-app

The process will be suspended on startup and listening for a debugger on port 8000.

If you need more control of the debugger, this can be specified using the MAVEN_OPTS environment variable, and launch Maven with the default "mvn" command:

MAVEN_OPTS="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=5005"
mvn grails:run-app

Raising issues

If you come across any problems with the Maven integration, please raise a JIRA issue as a sub-task of GRAILS-3547.